Jacobsen AR722

In Stock


Be the master of your grounds by boosting productivity with the superior power, contour following and cutting flexibility of the NEW AR722T. The seven-gang rotary mower is equipped with a 65.2 hp (48.6 kW) turbo-charged diesel engine that provides class-leading power to the TrimTek™ decks and SureTrac™ four-wheel drive traction system for exceptional cutting performance.

  • Rugged and reliable 65.2 hp (48.6 kW) Kubota turbo-charged Tier 4 Final (Stage IIIB) diesel engine delivers unmatched, class-leading power with ultra-low emissions.
  • Get more done in less time with a massive 124 in. (3.15 m) total width-of-cut that mows up to 8.7 acres per hour (3.52 ha/h).
  • The ergonomic cockpit was designed for operator comfort and features a premium air-ride suspension seat, tilt steering wheel and an intuitive control console. Standard foldable ROPS keeps the operator safe and allows maneuverability in low-height areas.
  • SureTrac parallel-cross-series four-wheel drive traction system transfers power where needed to climb hillsides and glide over contours with ease.
  • Joystick-controlled deck hydraulic lift system with individual controls for rear wing decks allowing operators to mow with five, six or seven decks and providing mow-width flexibility and maneuverability around obstacles.
  • Engine
  • Type:
    Kubota V2403-CR-T 4-cylinder, turbocharged, liquid-cooled diesel
    Rated Horsepower:
    6 kW maximum
    Emissions Level:
    EU Stage IIIB; Ultra-low sulfur diesel fuel required
    2434 cc
    Air Cleaner System:
    2-stage Donaldson® dry cartridge type with evacuator valve and service indicator
    Cooling System:
    Side-by-side radiator/hydraulic oil cooler; pressurised; 7.6 L capacity
    Fully pressurised with remote engine oil cooler
    Fuel Capacity:
    64.4 L
    Oil Filter Type:
    Full-flow, replaceable spin-on remote type
    Electrical System:
    12V input/output controller; 45-amp alternator; 600 CCA battery; engine control unit (ECU)
  • Speed (Maximum)
  • Mowing:
    3 km/h
    19.3 km/h
    Reverse 8.1 km/h
  • Traction and Drive
  • Traction System:
    SureTrac™ 4WD, parallel-cross-series system servo-controlled variable displacement hydro; four high-torque wheel motors; 2WD in reverse
    Deck Drive:
    3-section pump and direct-cooled deck motors
    Hydraulic System:
    53 L capacity; hydraulic tank oil level monitor and horn alarm; GreensCare biodegradable fluid; full-flow, 10 micron filter, 40 gpm
    Hydraulic Cooling:
    Side-by-side radiator/hydraulic oil cooler; pressurized
  • Tires, Brakes, and Steering
  • Front Tires:
    Two 26.5 x 14-12, 6-ply, turf tread
    Rear Tires:
    Two 22.5 x 10-8, 4-ply turf tread
    Dynamic, through-traction system
    Parking Brake:
    Wet parking brakes integrated in front wheel motors; engage switch on control console
    Rear wheel, hydrostatic power steering with tilt adjustable steering wheel
  • Decks and Cutting Units
  • Number and Size:
    Seven, TrimTek™ 55.9 cm rotary cutting decks Equipped for rear-discharge or mulching, with rear roller and scraper
    7-gauge, heavy-duty welded with pressed steel. Wing deck protection – front impact absorption system with spring cushion and shear pin for wing decks 6 and 7
    Caster Wheels:
    Fourteen, 12.7 x 10.2 cm with greaseable tapered roller bearings
    Cutting Unit Lift:
    Hand operated, joystick controlled hydraulic lift system. Individual switches for wing decks 6 and 7 – engage/disengage to operate with or independent of the center 5 decks
    Weight Transfer:
    Adjustable hydraulic weight transfer – automatic electronic activation at operator controls with mow switch. Center 5 decks adjusted via lift/lower joystick procedure hydro electronically, wing decks adjusted via knob on wing lift valve
    Seven, 56.8 cm heat treated alloy combo blades
    Fixed displacement, self-lubricating with 2.54 cm diameter shaft; double sealed bearings
    Height of cut:
    19 mm – 133 mm in 6 mm increments; minimal tools required for adjustment
    Cutting Capacity:
    Up to 3.52 ha/hr at 11.27 km/h (no overlaps or stops)
    Overall Cutting Width:
    15 m; 2.29 m with deck 6 and 7 raised
    Fuel Economy & Runtime:
    5.4 L/hr fuel consumption at 40% load; Up to 12 hours on single tank of fuel (dependent on operation and turf conditions)
  • Weight and Dimensions
  • Weight:
    2018 kg
    All weights are with full fluids
    3 m
    2.26 m with ROPS up; 1.55 m with ROPS down or folded
    1.6 m
    3.38 m
    Transport Width:
    2.49 m


There are no reviews yet.

Be the first to review “Jacobsen AR722”